I thought I would show the back of the broom heads to show you how to staple them if you purchase just the fabric to recover the broom heads yourself. On the left (green) has been stapled with a heavy duty staple gun. The staples do not go in all the way because the plastic is so hard and a lot of staples were not used so the plastic head can be reused over and over again. The red one in the middle I have used an air stapler (the staples go in flush). The blue one on the right is one that I produce, it is a 1/2 inch thick lightweight plastic 1/8 of an inch thicker then the black plastic heads. The nuts will not pull through on my broom heads if the bolts have been overtightened.